# Pastebin vsM2DAFw smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org ATA device successfully opened Use 'smartctl -a' (or '-x') to print SMART (and more) information [dllewellyn@freenas ~]$ sudo smartctl -x /dev/ada1 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD30EZRS-11J99B1 Serial Number: WD-WCAWZ3065054 LU WWN Device Id: 5 0014ee 20773ddc6 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Feb 13 22:44:41 2017 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x05) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (51480) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 494) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 148 138 021 - 9558 4 Start_Stop_Count -O--CK 092 092 000 - 8396 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 054 054 000 - 34250 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 695 192 Power-Off_Retract_Count -O--CK 200 200 000 - 465 193 Load_Cycle_Count -O--CK 001 001 000 - 1626326 194 Temperature_Celsius -O---K 122 077 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 34234 - # 2 Short offline Completed without error 00% 34210 - # 3 Short offline Completed without error 00% 34186 - # 4 Short offline Completed without error 00% 34162 - # 5 Extended offline Completed: read failure 30% 34150 4378936640 # 6 Short offline Completed without error 00% 34138 - # 7 Short offline Completed without error 00% 34114 - # 8 Short offline Completed without error 00% 34090 - # 9 Short offline Completed without error 00% 34066 - #10 Short offline Completed without error 00% 34042 - #11 Short offline Completed without error 00% 34018 - #12 Short offline Completed without error 00% 33994 - #13 Short offline Completed without error 00% 33971 - #14 Short offline Completed without error 00% 33947 - #15 Short offline Completed without error 00% 33923 - #16 Short offline Completed without error 00% 33899 - #17 Short offline Completed without error 00% 33875 - #18 Short offline Completed without error 00% 33851 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 29/33 Celsius Lifetime Min/Max Temperature: 0/75 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (426) Index Estimated Time Temperature Celsius 427 2017-02-13 14:47 30 *********** 428 2017-02-13 14:48 29 ********** 429 2017-02-13 14:49 30 *********** ... ..( 3 skipped). .. *********** 433 2017-02-13 14:53 30 *********** 434 2017-02-13 14:54 29 ********** 435 2017-02-13 14:55 30 *********** 436 2017-02-13 14:56 29 ********** 437 2017-02-13 14:57 30 *********** ... ..( 8 skipped). .. *********** 446 2017-02-13 15:06 30 *********** 447 2017-02-13 15:07 29 ********** 448 2017-02-13 15:08 30 *********** ... ..( 8 skipped). .. *********** 457 2017-02-13 15:17 30 *********** 458 2017-02-13 15:18 29 ********** 459 2017-02-13 15:19 30 *********** ... ..( 89 skipped). .. *********** 71 2017-02-13 16:49 30 *********** 72 2017-02-13 16:50 29 ********** 73 2017-02-13 16:51 30 *********** 74 2017-02-13 16:52 30 *********** 75 2017-02-13 16:53 29 ********** 76 2017-02-13 16:54 30 *********** ... ..( 5 skipped). .. *********** 82 2017-02-13 17:00 30 *********** 83 2017-02-13 17:01 29 ********** 84 2017-02-13 17:02 30 *********** ... ..(145 skipped). .. *********** 230 2017-02-13 19:28 30 *********** 231 2017-02-13 19:29 29 ********** 232 2017-02-13 19:30 30 *********** ... ..( 16 skipped). .. *********** 249 2017-02-13 19:47 30 *********** 250 2017-02-13 19:48 29 ********** 251 2017-02-13 19:49 30 *********** ... ..( 88 skipped). .. *********** 340 2017-02-13 21:18 30 *********** 341 2017-02-13 21:19 29 ********** 342 2017-02-13 21:20 30 *********** 343 2017-02-13 21:21 30 *********** 344 2017-02-13 21:22 29 ********** 345 2017-02-13 21:23 30 *********** ... ..( 36 skipped). .. *********** 382 2017-02-13 22:00 30 *********** 383 2017-02-13 22:01 29 ********** 384 2017-02-13 22:02 30 *********** ... ..( 14 skipped). .. *********** 399 2017-02-13 22:17 30 *********** 400 2017-02-13 22:18 29 ********** 401 2017-02-13 22:19 30 *********** ... ..( 2 skipped). .. *********** 404 2017-02-13 22:22 30 *********** 405 2017-02-13 22:23 29 ********** 406 2017-02-13 22:24 29 ********** 407 2017-02-13 22:25 30 *********** ... ..( 2 skipped). .. *********** 410 2017-02-13 22:28 30 *********** 411 2017-02-13 22:29 29 ********** 412 2017-02-13 22:30 30 *********** 413 2017-02-13 22:31 29 ********** 414 2017-02-13 22:32 29 ********** 415 2017-02-13 22:33 29 ********** 416 2017-02-13 22:34 30 *********** ... ..( 5 skipped). .. *********** 422 2017-02-13 22:40 30 *********** 423 2017-02-13 22:41 29 ********** 424 2017-02-13 22:42 30 *********** 425 2017-02-13 22:43 29 ********** 426 2017-02-13 22:44 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 683382 Vendor specific