# Pastebin nAapZUm6 WARNING: linux-yocto-5.14.21+gitAUTOINC+4f4ad2c808_9d5572038e-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration: [NOTE]: 'CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE' last val (y) and .config val (n) do not match [INFO]: CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE : n ## .config: 549 :configs///defconfig (y) [INFO]: raw config text: config CPU_FREQ_DEFAULT_GOV_USERSPACE bool "userspace" select CPU_FREQ_GOV_USERSPACE depends on help Use the CPUFreq governor 'userspace' as default. This allows you to set the CPU frequency manually or when a userspace program shall be able to set the CPU dynamically without having to enable the userspace governor manually. Config 'CPU_FREQ_DEFAULT_GOV_USERSPACE' has the following Direct dependencies (CPU_FREQ_DEFAULT_GOV_USERSPACE=y): Parent dependencies are: choice [y] [NOTE]: 'CONFIG_SND_SEQ_DUMMY' last val (y) and .config val (m) do not match [INFO]: CONFIG_SND_SEQ_DUMMY : m ## .config: 3800 :configs///defconfig (y) [INFO]: raw config text: config SND_SEQ_DUMMY tristate "Sequencer dummy client" depends on SND_SEQUENCER && SND && !UML && SOUND help Say Y here to enable the dummy sequencer client. This client is a simple MIDI-through client: all normal input events are redirected to the output port immediately. You don't need this unless you want to connect many MIDI devices or applications together. To compile this driver as a module, choose M here: the module will be called snd-seq-dummy. Config 'SND_SEQ_DUMMY' has the following Direct dependencies (SND_SEQ_DUMMY=m): SND_SEQUENCER(=m) && SND(=m) && !UML(undefined/n) (=y) && SOUND(=m) Parent dependencies are: SOUND [m] SND_SEQUENCER [m] UML [UML] SND [m] [NOTE]: 'CONFIG_EEEPC_LAPTOP' last val (y) and .config val (m) do not match [INFO]: CONFIG_EEEPC_LAPTOP : m ## .config: 4508 :configs///defconfig (y) [INFO]: raw config text: config EEEPC_LAPTOP tristate "Eee PC Hotkey Driver" select HWMON select LEDS_CLASS select NEW_LEDS select INPUT_SPARSEKMAP depends on ACPI && INPUT && (RFKILL || RFKILL = n) && (ACPI_VIDEO || ACPI_VIDEO = n) && HOTPLUG_PCI && BACKLIGHT_CLASS_DEVICE && X86_PLATFORM_DEVICES && X86 help This driver supports the Fn-Fx keys on Eee PC laptops. It also gives access to some extra laptop functionalities like Bluetooth, backlight and allows powering on/off some other devices. If you have an Eee PC laptop, say Y or M here. If this driver doesn't work on your Eee PC, try eeepc-wmi instead. Config 'EEEPC_LAPTOP' has the following Direct dependencies (EEEPC_LAPTOP=m): ACPI(=y) && INPUT(=y) && RFKILL(=y) || RFKILL(=y) = n (=y) && ACPI_VIDEO(=m) || ACPI_VIDEO(=m) = n (=m) && HOTPLUG_PCI(=y) && BACKLIGHT_CLASS_DEVICE(=m) && X86_PLATFORM_DEVICES(=y) && X86(=y) Parent dependencies are: RFKILL [y] ACPI_VIDEO [m] X86_PLATFORM_DEVICES [y] INPUT [y] ACPI [y] X86 [y] BACKLIGHT_CLASS_DEVICE [m] HOTPLUG_PCI [y] [NOTE]: 'CONFIG_DEBUG_DEVRES' last val (y) and .config val (n) do not match [INFO]: CONFIG_DEBUG_DEVRES : n [INFO]: raw config text: config DEBUG_DEVRES bool "Managed device resources verbose debug messages" depends on DEBUG_KERNEL help This option enables kernel parameter devres.log. If set to non-zero, devres debug messages are printed. Select this if you are having a problem with devres or want to debug resource management for a managed device. devres.log can be switched on and off from sysfs node. If you are unsure about this, Say N here. Config 'DEBUG_DEVRES' has the following Direct dependencies (DEBUG_DEVRES=n): DEBUG_KERNEL(=n) Parent dependencies are: DEBUG_KERNEL [n] [INFO]: config 'CONFIG_DEBUG_DEVRES' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_NET_TULIP' last val (y) and .config val (n) do not match [INFO]: CONFIG_NET_TULIP : n [INFO]: raw config text: config NET_TULIP bool "DEC - Tulip devices" depends on (PCI || EISA || CARDBUS) && NET_VENDOR_DEC && ETHERNET && NETDEVICES help This selects the "Tulip" family of EISA/PCI network cards. Config 'NET_TULIP' has the following Direct dependencies (NET_TULIP=n): PCI(=y) || EISA(=n) || CARDBUS(=y) (=y) && NET_VENDOR_DEC(=n) && ETHERNET(=y) && NETDEVICES(=y) Parent dependencies are: EISA [n] NET_VENDOR_DEC [n] ETHERNET [y] CARDBUS [y] PCI [y] NETDEVICES [y] [INFO]: config 'CONFIG_NET_TULIP' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_FORCEDETH' last val (y) and .config val (n) do not match [INFO]: CONFIG_FORCEDETH : n [INFO]: raw config text: config FORCEDETH tristate "nForce Ethernet support" depends on PCI && NET_VENDOR_NVIDIA && ETHERNET && NETDEVICES help If you have a network (Ethernet) controller of this type, say Y here. To compile this driver as a module, choose M here. The module will be called forcedeth. Config 'FORCEDETH' has the following Direct dependencies (FORCEDETH=n): PCI(=y) && NET_VENDOR_NVIDIA(=n) && ETHERNET(=y) && NETDEVICES(=y) Parent dependencies are: PCI [y] NETDEVICES [y] ETHERNET [y] NET_VENDOR_NVIDIA [n] [INFO]: config 'CONFIG_FORCEDETH' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_LOGITECH_FF' last val (y) and .config val (n) do not match [INFO]: CONFIG_LOGITECH_FF : n [INFO]: raw config text: config LOGITECH_FF bool "Logitech force feedback support" select INPUT_FF_MEMLESS depends on HID_LOGITECH && HID && HID && INPUT help Say Y here if you have one of these devices: - Logitech WingMan Cordless RumblePad - Logitech WingMan Cordless RumblePad 2 - Logitech WingMan Force 3D and if you want to enable force feedback for them. Note: if you say N here, this device will still be supported, but without force feedback. Config 'LOGITECH_FF' has the following Direct dependencies (LOGITECH_FF=n): HID_LOGITECH(=n) && HID(=y) && INPUT(=y) Parent dependencies are: HID_LOGITECH [n] INPUT [y] HID [y] [INFO]: config 'CONFIG_LOGITECH_FF' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_AMD_IOMMU' last val (y) and .config val (n) do not match [INFO]: CONFIG_AMD_IOMMU : n [INFO]: raw config text: config AMD_IOMMU bool "AMD IOMMU support" select SWIOTLB select PCI_MSI select PCI_ATS select PCI_PRI select PCI_PASID select IOMMU_API select IOMMU_IOVA select IOMMU_DMA select IOMMU_IO_PGTABLE depends on X86_64 && PCI && ACPI && HAVE_CMPXCHG_DOUBLE && IOMMU_SUPPORT help With this option you can enable support for AMD IOMMU hardware in your system. An IOMMU is a hardware component which provides remapping of DMA memory accesses from devices. With an AMD IOMMU you can isolate the DMA memory of different devices and protect the system from misbehaving device drivers or hardware. You can find out if your system has an AMD IOMMU if you look into your BIOS for an option to enable it or if you have an IVRS ACPI table. Config 'AMD_IOMMU' has the following Direct dependencies (AMD_IOMMU=n): X86_64(=y) && PCI(=y) && ACPI(=y) && HAVE_CMPXCHG_DOUBLE(=y) && IOMMU_SUPPORT(=n) Parent dependencies are: HAVE_CMPXCHG_DOUBLE [y] ACPI [y] PCI [y] IOMMU_SUPPORT [n] X86_64 [y] [INFO]: config 'CONFIG_AMD_IOMMU' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_INTEL_IOMMU' last val (y) and .config val (n) do not match [INFO]: CONFIG_INTEL_IOMMU : n [INFO]: raw config text: config INTEL_IOMMU bool "Support for Intel IOMMU using DMA Remapping Devices" select DMA_OPS select IOMMU_API select IOMMU_IOVA select NEED_DMA_MAP_STATE select DMAR_TABLE select SWIOTLB select IOASID select IOMMU_DMA select PCI_ATS depends on PCI_MSI && ACPI && (X86 || IA64) && IOMMU_SUPPORT help DMA remapping (DMAR) devices support enables independent address translations for Direct Memory Access (DMA) from devices. These DMA remapping devices are reported via ACPI tables and include PCI device scope covered by these DMA remapping devices. Config 'INTEL_IOMMU' has the following Direct dependencies (INTEL_IOMMU=n): PCI_MSI(=y) && ACPI(=y) && X86(=y) || IA64(undefined/n) (=y) && IOMMU_SUPPORT(=n) Parent dependencies are: IOMMU_SUPPORT [n] X86 [y] ACPI [y] PCI_MSI [y] IA64 [IA64] [INFO]: config 'CONFIG_INTEL_IOMMU' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_DEBUG_BOOT_PARAMS' last val (y) and .config val (n) do not match [INFO]: CONFIG_DEBUG_BOOT_PARAMS : n [INFO]: raw config text: config DEBUG_BOOT_PARAMS bool "Debug boot parameters" depends on DEBUG_KERNEL && DEBUG_FS help This option will cause struct boot_params to be exported via debugfs. Config 'DEBUG_BOOT_PARAMS' has the following Direct dependencies (DEBUG_BOOT_PARAMS=n): DEBUG_KERNEL(=n) && DEBUG_FS(=y) Parent dependencies are: DEBUG_KERNEL [n] DEBUG_FS [y] [INFO]: config 'CONFIG_DEBUG_BOOT_PARAMS' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_BLK_DEV_FD' last val (m) and .config val (n) do not match [INFO]: CONFIG_BLK_DEV_FD : n [INFO]: raw config text: config BLK_DEV_FD tristate "Normal floppy disk support" depends on ARCH_MAY_HAVE_PC_FDC && BLK_DEV help If you want to use the floppy disk drive(s) of your PC under Linux, say Y. Information about this driver, especially important for IBM Thinkpad users, is contained in . That file also contains the location of the Floppy driver FAQ as well as location of the fdutils package used to configure additional parameters of the driver at run time. To compile this driver as a module, choose M here: the module will be called floppy. Config 'BLK_DEV_FD' has the following Direct dependencies (BLK_DEV_FD=n): ARCH_MAY_HAVE_PC_FDC(=y) && BLK_DEV(=n) Parent dependencies are: ARCH_MAY_HAVE_PC_FDC [y] BLK_DEV [n] [INFO]: config 'CONFIG_BLK_DEV_FD' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_IRQ_REMAP' last val (y) and .config val (n) do not match [INFO]: CONFIG_IRQ_REMAP : n [INFO]: raw config text: config IRQ_REMAP bool "Support for Interrupt Remapping" select DMAR_TABLE depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && IOMMU_SUPPORT help Supports Interrupt remapping for IO-APIC and MSI devices. To use x2apic mode in the CPU's which support x2APIC enhancements or to support platforms with CPU's having > 8 bit APIC ID, say Y. Config 'IRQ_REMAP' has the following Direct dependencies (IRQ_REMAP=n): X86_64(=y) && X86_IO_APIC(=y) && PCI_MSI(=y) && ACPI(=y) && IOMMU_SUPPORT(=n) Parent dependencies are: X86_IO_APIC [y] ACPI [y] PCI_MSI [y] IOMMU_SUPPORT [n] X86_64 [y] [INFO]: config 'CONFIG_IRQ_REMAP' was set, but it wasn't assignable, check (parent) dependencies WARNING: linux-yocto-5.14.21+gitAUTOINC+4f4ad2c808_9d5572038e-r0 do_kernel_configcheck: [kernel config]: This BSP contains fragments with warnings: [INFO]: the following symbols were not found in the active configuration: - CONFIG_INPUT_POLLDEV