# Pastebin mdTBN1Qv ## Transferring control to EFI (at address 08080000) ... EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.7.7 (dxue@build-server) (gcc version 9.3.0 (Buildroot 2020.08-git-05335-g208d3eb045-dirty), GNU ld 0 [ 0.000000] Machine model: Libre Computer AML-S805X-AC [ 0.000000] efi: EFI v2.80 by Das U-Boot [ 0.000000] efi: RTPROP=0x3aeef040 SMBIOS=0x3aee9000 RNG=0x39b6d040 MEMRESERVE=0x39b6c040 [ 0.000000] efi: seeding entropy pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000029800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 20 pages/cpu s49560 r0 d32360 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 252736 [ 0.000000] Kernel command line: noinitrd lost [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 722824K/1027072K available (10172K kernel code, 786K rwdata, 2980K rodata, 5568K init, 378K bss, 42104K res) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000246] Console: colour dummy device 80x25 [ 0.000605] printk: console [tty0] enabled [ 0.000643] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000668] pid_max: default: 32768 minimum: 301 [ 0.000783] LSM: Security Framework initializing [ 0.000854] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.000879] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002243] rcu: Hierarchical SRCU implementation. [ 0.002578] Remapping and enabling EFI services. [ 0.002830] smp: Bringing up secondary CPUs ... [ 0.003333] Detected VIPT I-cache on CPU1 [ 0.003389] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.003924] Detected VIPT I-cache on CPU2 [ 0.003969] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.004520] Detected VIPT I-cache on CPU3 [ 0.004560] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.004630] smp: Brought up 1 node, 4 CPUs [ 0.004712] SMP: Total of 4 processors activated. [ 0.004725] CPU features: detected: 32-bit EL0 Support [ 0.004739] CPU features: detected: CRC32 instructions [ 0.004902] CPU: All CPU(s) started at EL2 [ 0.004928] alternatives: patching kernel code [ 0.005648] devtmpfs: initialized [ 0.010051] random: get_random_u32 called from bucket_table_alloc.isra.0+0x100/0x130 with crng_init=0 [ 0.010443] Registered cp15_barrier emulation handler [ 0.010493] Registered setend emulation handler [ 0.010927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.010967] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.021258] xor: measuring software checksum speed [ 0.060147] 8regs : 2167.000 MB/sec [ 0.100194] 32regs : 2825.000 MB/sec [ 0.140244] arm64_neon: 2209.000 MB/sec [ 0.140257] xor: using function: 32regs (2825.000 MB/sec) [ 0.140281] pinctrl core: initialized pinctrl subsystem [ 0.140696] thermal_sys: Registered thermal governor 'step_wise' [ 0.140699] thermal_sys: Registered thermal governor 'power_allocator' [ 0.141033] SMBIOS 3.0 present. [ 0.141071] DMI: libre-computer aml-s805x-ac/aml-s805x-ac, BIOS 2020.07+ 07/07/2020 [ 0.141347] NET: Registered protocol family 16 [ 0.142990] DMA: preallocated 256 KiB pool for atomic allocations [ 0.143071] audit: initializing netlink subsys (disabled) [ 0.143274] audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1 [ 0.143711] cpuidle: using governor menu [ 0.143874] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.143975] ASID allocator initialised with 65536 entries [ 0.144159] Serial: AMBA PL011 UART driver [ 0.158371] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.158403] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.158419] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.158435] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.160200] cryptd: max_cpu_qlen set to 1000 [ 0.228398] raid6: neonx8 gen() 2065 MB/s [ 0.296462] raid6: neonx8 xor() 1558 MB/s [ 0.364538] raid6: neonx4 gen() 2148 MB/s [ 0.432609] raid6: neonx4 xor() 1538 MB/s [ 0.500696] raid6: neonx2 gen() 2030 MB/s [ 0.568760] raid6: neonx2 xor() 1408 MB/s [ 0.636846] raid6: neonx1 gen() 1581 MB/s [ 0.704909] raid6: neonx1 xor() 1184 MB/s [ 0.772983] raid6: int64x8 gen() 527 MB/s [ 0.841088] raid6: int64x8 xor() 320 MB/s [ 0.909125] raid6: int64x4 gen() 700 MB/s [ 0.977209] raid6: int64x4 xor() 370 MB/s [ 1.045263] raid6: int64x2 gen() 1138 MB/s [ 1.113322] raid6: int64x2 xor() 609 MB/s [ 1.181393] raid6: int64x1 gen() 795 MB/s [ 1.249473] raid6: int64x1 xor() 415 MB/s [ 1.249485] raid6: using algorithm neonx4 gen() 2148 MB/s [ 1.249498] raid6: .... xor() 1538 MB/s, rmw enabled [ 1.249511] raid6: using neon recovery algorithm [ 1.250224] VCCK: supplied by DC_5V [ 1.250446] VCC_3V3: supplied by DC_5V [ 1.250658] VDDIO_BOOT: supplied by VCC_3V3 [ 1.251214] iommu: Default domain type: Translated [ 1.251560] SCSI subsystem initialized [ 1.251758] usbcore: registered new interface driver usbfs [ 1.251797] usbcore: registered new interface driver hub [ 1.251878] usbcore: registered new device driver usb [ 1.252258] EDAC MC: Ver: 3.0.0 [ 1.254047] clocksource: Switched to clocksource arch_sys_counter [ 1.259795] NET: Registered protocol family 2 [ 1.260215] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 1.260261] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.260334] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.260460] TCP: Hash tables configured (established 8192 bind 8192) [ 1.260597] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.260638] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.260808] NET: Registered protocol family 1 [ 1.261256] RPC: Registered named UNIX socket transport module. [ 1.261279] RPC: Registered udp transport module. [ 1.261291] RPC: Registered tcp transport module. [ 1.261303] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.707769] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 5.713367] Initialise system trusted keyrings [ 5.713580] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 5.719886] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.720839] NFS: Registering the id_resolver key type [ 5.720886] Key type id_resolver registered [ 5.720898] Key type id_legacy registered [ 5.720917] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 5.720934] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 5.734126] NET: Registered protocol family 38 [ 5.734159] Key type asymmetric registered [ 5.734171] Asymmetric key parser 'x509' registered [ 5.734233] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 5.734466] io scheduler bfq registered [ 5.737312] efifb: probing for efifb [ 5.737386] efifb: framebuffer at 0x3fe79000, using 1500k, total 1500k [ 5.737403] efifb: mode is 800x480x32, linelength=3200, pages=1 [ 5.737416] efifb: scrolling: redraw [ 5.737429] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 5.742622] Console: switching to colour frame buffer device 100x30 [ 5.747593] fb0: EFI VGA frame buffer device [ 5.747762] IPMI message handler: version 39.2 [ 5.747964] ipmi device interface [ 5.748085] ipmi_si: IPMI System Interface driver [ 5.748371] ipmi_si: Unable to find any System Interface(s) [ 5.757012] soc soc0: Amlogic Meson GXL (S805X) Revision 21:d (34:2) Detected [ 5.762863] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.767332] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 12, base_baud = 1500000) is a meson_uart [ 6.603174] printk: console [ttyAML0] enabled [ 6.613043] lima d00c0000.gpu: IRQ ppmmu3 not found [ 6.615793] lima d00c0000.gpu: IRQ ppmmu4 not found [ 6.619719] lima d00c0000.gpu: IRQ ppmmu5 not found [ 6.624484] lima d00c0000.gpu: IRQ ppmmu6 not found [ 6.629299] lima d00c0000.gpu: IRQ ppmmu7 not found [ 6.634075] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 6.641466] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.7.7 #2 [ 6.647191] Hardware name: libre-computer aml-s805x-ac/aml-s805x-ac, BIOS 2020.07+ 07/07/2020 [ 6.655756] pstate: 40000005 (nZcv daif -PAN -UAO) [ 6.660513] pc : lima_gp_init+0x28/0x184 [ 6.664372] lr : lima_device_init+0x32c/0x528 [ 6.668629] sp : ffff80001002bb50 [ 6.671830] x29: ffff80001002bb50 x28: 0000000000000000 [ 6.677118] x27: ffff800010db3088 x26: 0000000000000001 [ 6.682349] x25: 0000000000000001 x24: ffff00003f06b0d0 [ 6.687582] x23: 000000000000000a x22: ffff80001133e940 [ 6.692797] x21: ffff00003f06b080 x20: ffff00003f06b210 [ 6.698019] x19: ffff00003f06b080 x18: 0000000000000000 [ 6.703257] x17: 000000000000000e x16: 0000000000000007 [ 6.708455] x15: 000000000000000a x14: ffffffffffffffff [ 6.713669] x13: ffffffffffffffff x12: ffffffffffffffff [ 6.718907] x11: 0000000000000018 x10: ffff8000112f3c18 [ 6.724170] x9 : 0000000000000016 x8 : ffff8000112f3c10 [ 6.729392] x7 : 0000000000000000 x6 : 0000000000000000 [ 6.734623] x5 : ffff00003f400248 x4 : ffff00003f400320 [ 6.739829] x3 : 0000000000000000 x2 : ffff80001002b9d8 [ 6.745022] x1 : ffff8000105b4e08 x0 : ffff80001390006c [ 6.750192] Call trace: [ 6.752482] lima_gp_init+0x28/0x184 [ 6.756016] lima_device_init+0x32c/0x528 [ 6.759959] lima_pdev_probe+0xa4/0xe4 [ 6.763702] platform_drv_probe+0x54/0xa4 [ 6.767716] really_probe+0x1f4/0x2e0 [ 6.771377] driver_probe_device+0xd8/0xe8 [ 6.775471] device_driver_attach+0x44/0x70 [ 6.779550] __driver_attach+0xbc/0xc0 [ 6.783193] bus_for_each_dev+0x60/0x90 [ 6.786909] driver_attach+0x24/0x30 [ 6.790343] bus_add_driver+0x160/0x1a8 [ 6.794132] driver_register+0xb4/0xec [ 6.797832] __platform_driver_register+0x4c/0x58 [ 6.802511] lima_init+0x1c/0x28 [ 6.805694] do_one_initcall+0x5c/0x118 [ 6.809529] kernel_init_freeable+0x240/0x244 [ 6.813846] kernel_init+0x14/0x100 [ 6.817295] ret_from_fork+0x10/0x18 [ 6.820829] Code: a90363f7 f9400015 f9400800 9101b000 (b9400000) [ 6.826981] ---[ end trace 713ef621ab08af96 ]--- [ 6.831709] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 6.839307] SMP: stopping secondary CPUs [ 6.843193] Kernel Offset: disabled [ 6.846618] CPU features: 0x000002,00002004 [ 6.850802] Memory Limit: none [ 6.853829] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---