# Pastebin bx2lxFIb
# hdmi2usb-mode-switch --flash-image ~/Downloads/image-gateware+bios+firmware.bin 
Using FX2 firmware /lib/firmware/ixo-usb-jtag/usbjtag-opsis.hex
After flashing, the board will need to be power cycled.
Traceback (most recent call last):
  File "/usr/bin/hdmi2usb-mode-switch", line 9, in <module>
    load_entry_point('hdmi2usb.modeswitch==0.0.1', 'console_scripts', 'hdmi2usb-mode-switch')()
  File "/usr/share/hdmi2usb-mode-switch/hdmi2usb/modeswitch/cli.py", line 366, in main
    board, args.flash_image, verbose=args.verbose)
  File "/usr/share/hdmi2usb-mode-switch/hdmi2usb/modeswitch/boards.py", line 306, in flash_gateware
    verbose=verbose)
  File "/usr/share/hdmi2usb-mode-switch/hdmi2usb/modeswitch/boards.py", line 264, in _openocd_flash
    return _openocd_script(board, script, verbose=verbose)
  File "/usr/share/hdmi2usb-mode-switch/hdmi2usb/modeswitch/boards.py", line 216, in _openocd_script
    output)
hdmi2usb.modeswitch.boards.OpenOCDError: OpenOCD run failure: Returned 1.

OpenOCD command line resulted in 1