# Pastebin XRjFVW82
U-Boot SPL 2021.01-00484-g68d4175f61b0 (Sep 20 2022 - 22:10:20 -0500)
Model: Texas Instruments K3 J721E SoC
EEPROM not available at 0x50, trying to read at 0x51
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla')
TLB table from ffffc000 to 00000000
>>SPL: board_init_r()
spl_init
Trying to boot from MMC2
spl: mmc boot mode: fs
board_fit_image_post_process: processing image: addr=70000000, size=39848, os=arm-trusted-firmware
board_fit_image_post_process: matched image for ID 0
board_fit_image_post_process: processing image: addr=9e800000, size=378776, os=tee
board_fit_image_post_process: matched image for ID 1
board_fit_image_post_process: processing image: addr=89000000, size=217356, os=DM
board_fit_image_post_process: matched image for ID 3
board_fit_image_post_process: processing image: addr=80080000, size=162712, os=U-Boot
board_fit_image_post_process: matched image for ID 2
board_fit_image_post_process: processing image: addr=ffffffff, size=10103, os=
Unsupported OS image.. Jumping nevertheless..
loaded - jumping to U-Boot...
jump_to_image_no_args: jumping to address 41010000
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.5(release):08.01.00.006-1-g0588523a4b80
NOTICE:  BL31: Built : 22:10:15, Sep 20 2022
I/TC: 
I/TC: OP-TEE version: 3.15.0-rc1-1-g6fd1b4284302 (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 Wed Sep 21 03:10:20 UTC 2022 aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2021.01-00484-g68d4175f61b0 (Sep 20 2022 - 22:10:26 -0500)
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla')
TLB table from ffff4000 to 100000000
SPL malloc() before relocation used 0x2500 bytes (9 KB)
>>SPL: board_init_r()
spl_init
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Trying to boot from MMC2
spl: mmc boot mode: fs
Jumping to U-Boot
loaded - jumping to U-Boot...
image entry point: 0x80800000


U-Boot 2021.01-00484-g68d4175f61b0 (Sep 20 2022 - 22:10:26 -0500)

SoC:   J721E SR2.0
Model: Texas Instruments K3 J721E SoC
Board: BBONEAI-64-B0- rev B0
DRAM:  4 GiB
Flash: 0 Bytes
MMC:   sdhci@4f80000: 0, sdhci@4fb0000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment

In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
Net:   am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
eth0: ethernet@46000000
Press SPACE to abort autoboot in 2 seconds
=> i2c dev 0
Setting bus to 0
=> i2c md 0x51 0x00.1 40
0000: aa 55 33 ee 01 37 00 10 2e 00 42 42 4f 4e 45 41    .U3..7....BBONEA
0010: 49 2d 36 34 2d 42 30 2d 00 00 42 30 30 30 37 38    I-64-B0-..B00078
0020: 30 31 42 30 30 30 30 31 36 34 30 33 32 32 42 42    01B00001640322BB
0030: 42 42 42 42 30 30 34 31 11 02 00 60 7d fe ff ff    BBBB0041...`}...
=>