# Pastebin MgsKJMCB
: decode_new_cmd: decoded new command:9f
: decode_new_cmd: populated jedec code
: m25p80_transfer8: READING 0x20
bitbang_ssi: transfer(9f) -> 4
: m25p80_transfer8: READING 0x20
bitbang_ssi: transfer(0) -> 4
: m25p80_transfer8: READING 0x15
bitbang_ssi: transfer(0) -> a8
: decode_new_cmd: decoded new command:0
bitbang_ssi: transfer(0) -> 0
: decode_new_cmd: decoded new command:0
bitbang_ssi: transfer(0) -> 0
: decode_new_cmd: decoded new command:0
bitbang_ssi: transfer(0) -> 0
: decode_new_cmd: decoded new command:0
bitbang_ssi: transfer(0) -> 0
: m25p80_cs: deselect
m25p80 spi32766.0: m25p16 (2048 Kbytes)
3 ofpart partitions found on MTD device spi32766.0
Creating 3 MTD partitions on "spi32766.0":
0x000000000000-0x000000080000 : "gateware"
0x000000080000-0x000000088000 : "bios"
0x000000088000-0x000000200000 : "firmware"
spi_gpio spi: registered child spi32766.0
i2c /dev entries driver
i2c-core: driver [i2c-slave-eeprom] registered
tty-ldisc-0
drivers/tty/serial/uart-litex.c requested irq 2
drivers/tty/serial/uart-litex.c ret 0
drivers/tty/serial/uart-litex.c TXFULL 0
drivers/tty/serial/uart-litex.c RXEMPTY 1
drivers/tty/serial/uart-litex.c EV_STATUS 2
drivers/tty/serial/uart-litex.c EV_PENDING 0
drivers/tty/serial/uart-litex.c EV_ENABLE 0
drivers/tty/serial/uart-litex.c enabling EV
Freeing unused kernel memory: 920K
This architecture does not have kernel memory protection.
Starting logging: OK
Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
done.
Starting network: ip: socket: Function not implemented
ip: socket: Function not implemented
FAIL
drivers/tty/serial/uart-litex.c litex_uart_tx_empty

Welcome to Buildroot
buildroot login: drivers/tty/serial/uart-litex.c litex_uart_receive h
drivers/tty/serial/uart-litex.c litex_uart_receive e
drivers/tty/serial/uart-litex.c litex_uart_receive l
drivers/tty/serial/uart-litex.c litex_uart_receive l
drivers/tty/serial/uart-litex.c litex_uart_receive o
drivers/tty/serial/uart-litex.c litex_uart_receive