# Pastebin GATcALHq
[    4.470948] mmc0: new DDR MMC card at address 0001
[    4.471435] mmcblk0: mmc0:0001 AJNB4R 14.6 GiB 
[    4.474684] mmcblk0boot0: mmc0:0001 AJNB4R partition 1 4.00 MiB
[    4.480572] mmcblk0boot1: mmc0:0001 AJNB4R partition 2 4.00 MiB
[    4.486409] mmcblk0rpmb: mmc0:0001 AJNB4R partition 3 4.00 MiB
[    4.492828]  mmcblk0: p1 p2
[    4.495420] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
domain-0 init dvfs: 4
[    4.509587] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[    4.509676] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[    4.517955] mdio-mux-mmioreg c883455c.eth-phy-mux: failed to register mdio-mux bus /soc/periphs@c8834000/eth-phy-mux
[    4.527536] hctosys: unable to open rtc device (rtc0)
[    4.532251] HDMI_5V: disabling
[    4.535157] VCC_CARD: disabling
[    4.538236] ALSA device list:
[    4.541168]   No soundcards found.
[    4.550673] BTRFS: device label SYSTEM devid 1 transid 21 /dev/root
[    4.552150] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    4.557967] BTRFS info (device mmcblk0p2): has skinny extents
[    4.570824] BTRFS info (device mmcblk0p2): enabling ssd optimizations
[    4.572270] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -2
[    4.579487] Please append a correct "root=" boot option; here are the available partitions:
[    4.587760] b300        15267840 mmcblk0 
[    4.587762]  driver: mmcblk
[    4.594473]   b301          261120 mmcblk0p1 42aa95dd-01
[    4.594474] 
[    4.601199]   b302         3932160 mmcblk0p2 42aa95dd-02
[    4.601201] 
[    4.607928] b360            4096 mmcblk0rpmb 
[    4.607929]  (driver?)
[    4.614568] b340            4096 mmcblk0boot1 
[    4.614570]  (driver?)
[    4.621296] b320            4096 mmcblk0boot0 
[    4.621297]  (driver?)
[    4.628023] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)