# Pastebin FGfwYEfa
../src/openocd -f ./board/ti_am62pevm.cfg 
Open On-Chip Debugger 0.12.0+dev-02088-gcbc32c3831e3 (2025-07-23-02:14)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
adapter speed: 2500 kHz
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : XDS110: connected
Info : XDS110: vid/pid = 0451/bef3
Info : XDS110: firmware version = 3.0.0.35
Info : XDS110: hardware version = 0x002f
Info : XDS110: connected to target via JTAG
Info : XDS110: TCK set to 2500 kHz
Info : clock speed 2500 kHz
Info : JTAG tap: am62p.cpu tap/device found: 0x0bb9d02f (mfg: 0x017 (Texas Instruments), part: 0xbb9d, ver: 0x0)
Info : [am62p.axi_ap] Examination succeed
Info : [am62p.cpu.sysctrl] starting gdb server on 3333
Info : Listening on port 3333 for gdb connections
Info : [am62p.cpu.a53.0] starting gdb server on 3334
Info : Listening on port 3334 for gdb connections
Info : [am62p.cpu.a53.1] starting gdb server on 3335
Info : Listening on port 3335 for gdb connections
Info : [am62p.cpu.a53.2] starting gdb server on 3336
Info : Listening on port 3336 for gdb connections
Info : [am62p.cpu.a53.3] starting gdb server on 3337
Info : Listening on port 3337 for gdb connections
Info : [am62p.cpu.wkup0_r5.0] starting gdb server on 3338
Info : Listening on port 3338 for gdb connections
Info : [am62p.cpu.mcu0_r5.0] starting gdb server on 3339
Info : Listening on port 3339 for gdb connections
Info : [am62p.axi_ap] gdb port disabled
Info : accepting 'gdb' connection on tcp/3338
Info : [am62p.cpu.wkup0_r5.0] hardware has 8 breakpoints, 8 watchpoints
Info : [am62p.cpu.wkup0_r5.0] MPIDR level2 0, cluster 0, core 0, mono core, no SMT
[am62p.cpu.wkup0_r5.0] target halted in Thumb state due to debug-request, current mode: System
cpsr: 0x8000003f pc: 0x9cac2b2c
[am62p.cpu.wkup0_r5.0] D-Cache: enabled, I-Cache: enabled
Info : New GDB Connection: 1, Target am62p.cpu.wkup0_r5.0, state: halted
Info : dropped 'gdb' connection