# Pastebin Dxy1sTQC
(H2U A=or1k B=pipistrello) tansell@tansell-z620-l2:~/foss/timvideos/hdmi2usb/HDMI2USB-misoc-firmware-script-fixes$ openocd -f board/pipistrello.cfg -f board/or1k_generic.cfg -c 'init; exit'                       
Open On-Chip Debugger 0.10.0-dev-00248-gf3b38ff (2016-04-03-07:23)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
none separate
adapter speed: 30000 kHz
Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
jtagspi_program
Info : xilinx_bscan tap selected
Info : adv debug unit selected
Info : Option 7 is passed to adv debug unit
Info : set servers polling period to 1ms
adapter speed: 3000 kHz
Info : clock speed 3000 kHz
Info : JTAG tap: xc6s.tap tap/device found: 0x44008093 (mfg: 0x049 (Xilinx), part: 0x4008, ver: 0x4)
Info : JTAG tap: or1200.cpu tap/device found: 0xffffffff (mfg: 0x7ff (<invalid>), part: 0xffff, ver: 0xf)
Warn : JTAG tap: or1200.cpu       UNEXPECTED: 0xffffffff (mfg: 0x7ff (<invalid>), part: 0xffff, ver: 0xf)
Error: JTAG tap: or1200.cpu  expected 1 of 1: 0x020b30dd (mfg: 0x06e (Altera), part: 0x20b3, ver: 0x0)
Error: Trying to use configured scan chain anyway...
Error: or1200.cpu: IR capture error; saw 0x3f not 0x01
Warn : Bypassing JTAG setup events due to errors
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Info : adv debug unit is configured with option ENABLE_JSP_MULTI
Info : adv debug unit is configured with option ENABLE_JSP_SERVER
Halting processor
Info : Halt timed out, wake up GDB.
Error: timed out while waiting for target halted