# Pastebin 6KOmsuET
[  164.921265] bone-capemgr bone_capemgr.9: part_number 'BB-BONE-LCD77-01', version '00A3'
[  164.921438] bone-capemgr bone_capemgr.9: slot #7: generic override
[  164.921484] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 7
[  164.921533] bone-capemgr bone_capemgr.9: slot #7: 'Override Board Name,00A3,Override Manuf,BB-BONE-LCD77-01'
[  164.921787] bone-capemgr bone_capemgr.9: slot #7: Requesting part number/version based 'BB-BONE-LCD77-01-00A3.dtbo
[  164.921835] bone-capemgr bone_capemgr.9: slot #7: Requesting firmware 'BB-BONE-LCD77-01-00A3.dtbo' for board-name 'Override Board Name', version '00A3'
[  164.929550] bone-capemgr bone_capemgr.9: slot #7: dtbo 'BB-BONE-LCD77-01-00A3.dtbo' loaded; converting to live tree
[  164.932866] bone-capemgr bone_capemgr.9: slot #7: #4 overlays
[  164.939750] ehrpwm 48302200.ehrpwm: unable to select pin group
[  164.947930] pwm-backlight backlight.12: could not find pctldev for node /ocp/interrupt-controller@48200000, deferring probe
[  164.947984] pwm-backlight backlight.12: unable to select pin group
[  164.948038] pwm-backlight backlight.12: invalid default brightness level: 101, using 100
[  164.954380] panel panel.13: could not find pctldev for node /ocp/i2c@44e0b000/tps@24/regulators/regulator@1, deferring probe
[  164.954434] panel panel.13: Failed to get pinctrl
[  164.963578] platform panel.13: Driver panel requests probe deferral
[  164.964241] platform 4830e000.fb: alias fck already exists
[  164.971470] of_get_named_gpio_flags exited with status 2
[  164.971523] tilcdc 4830e000.fb: Power GPIO active high, initial state set to high
[  164.971837] tilcdc 4830e000.fb: no encoders/connectors found
[  164.978044] tilcdc 4830e000.fb: failed to initialize mode setting
[  164.995040] bone-capemgr bone_capemgr.9: slot #7: Applied #4 overlays.