{"body":"WARNING: linux-yocto-5.14.21+gitAUTOINC+4f4ad2c808_9d5572038e-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration:\n\n    [NOTE]: 'CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE' last val (y) and .config val (n) do not match\n    [INFO]: CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE : n ## .config: 549 :configs///defconfig (y)\n    [INFO]: raw config text:\n\n        config CPU_FREQ_DEFAULT_GOV_USERSPACE\n        \tbool \"userspace\"\n        \tselect CPU_FREQ_GOV_USERSPACE\n        \tdepends on <choice>\n        \thelp\n        \t  Use the CPUFreq governor 'userspace' as default. This allows\n        \t  you to set the CPU frequency manually or when a userspace\n        \t  program shall be able to set the CPU dynamically without having\n        \t  to enable the userspace governor manually.\n\n        Config 'CPU_FREQ_DEFAULT_GOV_USERSPACE' has the following Direct dependencies (CPU_FREQ_DEFAULT_GOV_USERSPACE=y):\n                <choice>\n        Parent dependencies are:\n             choice [y]\n    [NOTE]: 'CONFIG_SND_SEQ_DUMMY' last val (y) and .config val (m) do not match\n    [INFO]: CONFIG_SND_SEQ_DUMMY : m ## .config: 3800 :configs///defconfig (y)\n    [INFO]: raw config text:\n\n        config SND_SEQ_DUMMY\n        \ttristate \"Sequencer dummy client\"\n        \tdepends on SND_SEQUENCER && SND && !UML && SOUND\n        \thelp\n        \t  Say Y here to enable the dummy sequencer client.  This client\n        \t  is a simple MIDI-through client: all normal input events are\n        \t  redirected to the output port immediately.\n\n        \t  You don't need this unless you want to connect many MIDI\n        \t  devices or applications together.\n\n        \t  To compile this driver as a module, choose M here: the module\n        \t  will be called snd-seq-dummy.\n\n        Config 'SND_SEQ_DUMMY' has the following Direct dependencies (SND_SEQ_DUMMY=m):\n                SND_SEQUENCER(=m) && SND(=m) && !UML(undefined/n) (=y) && SOUND(=m)\n        Parent dependencies are:\n             SOUND [m] SND_SEQUENCER [m] UML [UML] SND [m]\n    [NOTE]: 'CONFIG_EEEPC_LAPTOP' last val (y) and .config val (m) do not match\n    [INFO]: CONFIG_EEEPC_LAPTOP : m ## .config: 4508 :configs///defconfig (y)\n    [INFO]: raw config text:\n\n        config EEEPC_LAPTOP\n        \ttristate \"Eee PC Hotkey Driver\"\n        \tselect HWMON\n        \tselect LEDS_CLASS\n        \tselect NEW_LEDS\n        \tselect INPUT_SPARSEKMAP\n        \tdepends on ACPI && INPUT && (RFKILL || RFKILL = n) && (ACPI_VIDEO || ACPI_VIDEO = n) && HOTPLUG_PCI && BACKLIGHT_CLASS_DEVICE && X86_PLATFORM_DEVICES && X86\n        \thelp\n        \t  This driver supports the Fn-Fx keys on Eee PC laptops.\n\n        \t  It  also gives access to some extra laptop functionalities like\n        \t  Bluetooth, backlight and allows powering on/off some other\n        \t  devices.\n\n        \t  If you have an Eee PC laptop, say Y or M here. If this driver\n        \t  doesn't work on your Eee PC, try eeepc-wmi instead.\n\n        Config 'EEEPC_LAPTOP' has the following Direct dependencies (EEEPC_LAPTOP=m):\n                ACPI(=y) && INPUT(=y) && RFKILL(=y) || RFKILL(=y) = n (=y) && ACPI_VIDEO(=m) || ACPI_VIDEO(=m) = n (=m) && HOTPLUG_PCI(=y) && BACKLIGHT_CLASS_DEVICE(=m) && X86_PLATFORM_DEVICES(=y) && X86(=y)\n        Parent dependencies are:\n             RFKILL [y] ACPI_VIDEO [m] X86_PLATFORM_DEVICES [y] INPUT [y] ACPI [y] X86 [y] BACKLIGHT_CLASS_DEVICE [m] HOTPLUG_PCI [y]\n    [NOTE]: 'CONFIG_DEBUG_DEVRES' last val (y) and .config val (n) do not match\n    [INFO]: CONFIG_DEBUG_DEVRES : n\n    [INFO]: raw config text:\n\n        config DEBUG_DEVRES\n        \tbool \"Managed device resources verbose debug messages\"\n        \tdepends on DEBUG_KERNEL\n        \thelp\n        \t  This option enables kernel parameter devres.log. If set to\n        \t  non-zero, devres debug messages are printed. Select this if\n        \t  you are having a problem with devres or want to debug\n        \t  resource management for a managed device. devres.log can be\n        \t  switched on and off from sysfs node.\n\n        \t  If you are unsure about this, Say N here.\n\n        Config 'DEBUG_DEVRES' has the following Direct dependencies (DEBUG_DEVRES=n):\n                DEBUG_KERNEL(=n)\n        Parent dependencies are:\n             DEBUG_KERNEL [n]\n    [INFO]: config 'CONFIG_DEBUG_DEVRES' was set, but it wasn't assignable, check (parent) dependencies\n\n\n    [NOTE]: 'CONFIG_NET_TULIP' last val (y) and .config val (n) do not match\n    [INFO]: CONFIG_NET_TULIP : n\n    [INFO]: raw config text:\n\n        config NET_TULIP\n        \tbool \"DEC - Tulip devices\"\n        \tdepends on (PCI || EISA || CARDBUS) && NET_VENDOR_DEC && ETHERNET && NETDEVICES\n        \thelp\n        \t  This selects the \"Tulip\" family of EISA/PCI network cards.\n\n        Config 'NET_TULIP' has the following Direct dependencies (NET_TULIP=n):\n                PCI(=y) || EISA(=n) || CARDBUS(=y) (=y) && NET_VENDOR_DEC(=n) && ETHERNET(=y) && NETDEVICES(=y)\n        Parent dependencies are:\n             EISA [n] NET_VENDOR_DEC [n] ETHERNET [y] CARDBUS [y] PCI [y] NETDEVICES [y]\n    [INFO]: config 'CONFIG_NET_TULIP' was set, but it wasn't assignable, check (parent) dependencies\n\n\n    [NOTE]: 'CONFIG_FORCEDETH' last val (y) and .config val (n) do not match\n    [INFO]: CONFIG_FORCEDETH : n\n    [INFO]: raw config text:\n\n        config FORCEDETH\n        \ttristate \"nForce Ethernet support\"\n        \tdepends on PCI && NET_VENDOR_NVIDIA && ETHERNET && NETDEVICES\n        \thelp\n        \t  If you have a network (Ethernet) controller of this type, say Y here.\n\n        \t  To compile this driver as a module, choose M here. The module\n        \t  will be called forcedeth.\n\n        Config 'FORCEDETH' has the following Direct dependencies (FORCEDETH=n):\n                PCI(=y) && NET_VENDOR_NVIDIA(=n) && ETHERNET(=y) && NETDEVICES(=y)\n        Parent dependencies are:\n             PCI [y] NETDEVICES [y] ETHERNET [y] NET_VENDOR_NVIDIA [n]\n    [INFO]: config 'CONFIG_FORCEDETH' was set, but it wasn't assignable, check (parent) dependencies\n\n\n    [NOTE]: 'CONFIG_LOGITECH_FF' last val (y) and .config val (n) do not match\n    [INFO]: CONFIG_LOGITECH_FF : n\n    [INFO]: raw config text:\n\n        config LOGITECH_FF\n        \tbool \"Logitech force feedback support\"\n        \tselect INPUT_FF_MEMLESS\n        \tdepends on HID_LOGITECH && HID && HID && INPUT\n        \thelp\n        \t  Say Y here if you have one of these devices:\n        \t  - Logitech WingMan Cordless RumblePad\n        \t  - Logitech WingMan Cordless RumblePad 2\n        \t  - Logitech WingMan Force 3D\n\n        \t  and if you want to enable force feedback for them.\n        \t  Note: if you say N here, this device will still be supported, but without\n        \t  force feedback.\n\n        Config 'LOGITECH_FF' has the following Direct dependencies (LOGITECH_FF=n):\n                HID_LOGITECH(=n) && HID(=y) && INPUT(=y)\n        Parent dependencies are:\n             HID_LOGITECH [n] INPUT [y] HID [y]\n    [INFO]: config 'CONFIG_LOGITECH_FF' was set, but it wasn't assignable, check (parent) dependencies\n\n\n    [NOTE]: 'CONFIG_AMD_IOMMU' last val (y) and .config val (n) do not match\n    [INFO]: CONFIG_AMD_IOMMU : n\n    [INFO]: raw config text:\n\n        config AMD_IOMMU\n        \tbool \"AMD IOMMU support\"\n        \tselect SWIOTLB\n        \tselect PCI_MSI\n        \tselect PCI_ATS\n        \tselect PCI_PRI\n        \tselect PCI_PASID\n        \tselect IOMMU_API\n        \tselect IOMMU_IOVA\n        \tselect IOMMU_DMA\n        \tselect IOMMU_IO_PGTABLE\n        \tdepends on X86_64 && PCI && ACPI && HAVE_CMPXCHG_DOUBLE && IOMMU_SUPPORT\n        \thelp\n        \t  With this option you can enable support for AMD IOMMU hardware in\n        \t  your system. An IOMMU is a hardware component which provides\n        \t  remapping of DMA memory accesses from devices. With an AMD IOMMU you\n        \t  can isolate the DMA memory of different devices and protect the\n        \t  system from misbehaving device drivers or hardware.\n\n        \t  You can find out if your system has an AMD IOMMU if you look into\n        \t  your BIOS for an option to enable it or if you have an IVRS ACPI\n        \t  table.\n\n        Config 'AMD_IOMMU' has the following Direct dependencies (AMD_IOMMU=n):\n                X86_64(=y) && PCI(=y) && ACPI(=y) && HAVE_CMPXCHG_DOUBLE(=y) && IOMMU_SUPPORT(=n)\n        Parent dependencies are:\n             HAVE_CMPXCHG_DOUBLE [y] ACPI [y] PCI [y] IOMMU_SUPPORT [n] X86_64 [y]\n    [INFO]: config 'CONFIG_AMD_IOMMU' was set, but it wasn't assignable, check (parent) dependencies\n\n\n    [NOTE]: 'CONFIG_INTEL_IOMMU' last val (y) and .config val (n) do not match\n    [INFO]: CONFIG_INTEL_IOMMU : n\n    [INFO]: raw config text:\n\n        config INTEL_IOMMU\n        \tbool \"Support for Intel IOMMU using DMA Remapping Devices\"\n        \tselect DMA_OPS\n        \tselect IOMMU_API\n        \tselect IOMMU_IOVA\n        \tselect NEED_DMA_MAP_STATE\n        \tselect DMAR_TABLE\n        \tselect SWIOTLB\n        \tselect IOASID\n        \tselect IOMMU_DMA\n        \tselect PCI_ATS\n        \tdepends on PCI_MSI && ACPI && (X86 || IA64) && IOMMU_SUPPORT\n        \thelp\n        \t  DMA remapping (DMAR) devices support enables independent address\n        \t  translations for Direct Memory Access (DMA) from devices.\n        \t  These DMA remapping devices are reported via ACPI tables\n        \t  and include PCI device scope covered by these DMA\n        \t  remapping devices.\n\n        Config 'INTEL_IOMMU' has the following Direct dependencies (INTEL_IOMMU=n):\n                PCI_MSI(=y) && ACPI(=y) && X86(=y) || IA64(undefined/n) (=y) && IOMMU_SUPPORT(=n)\n        Parent dependencies are:\n             IOMMU_SUPPORT [n] X86 [y] ACPI [y] PCI_MSI [y] IA64 [IA64]\n    [INFO]: config 'CONFIG_INTEL_IOMMU' was set, but it wasn't assignable, check (parent) dependencies\n\n\n    [NOTE]: 'CONFIG_DEBUG_BOOT_PARAMS' last val (y) and .config val (n) do not match\n    [INFO]: CONFIG_DEBUG_BOOT_PARAMS : n\n    [INFO]: raw config text:\n\n        config DEBUG_BOOT_PARAMS\n        \tbool \"Debug boot parameters\"\n        \tdepends on DEBUG_KERNEL && DEBUG_FS\n        \thelp\n        \t  This option will cause struct boot_params to be exported via debugfs.\n\n        Config 'DEBUG_BOOT_PARAMS' has the following Direct dependencies (DEBUG_BOOT_PARAMS=n):\n                DEBUG_KERNEL(=n) && DEBUG_FS(=y)\n        Parent dependencies are:\n             DEBUG_KERNEL [n] DEBUG_FS [y]\n    [INFO]: config 'CONFIG_DEBUG_BOOT_PARAMS' was set, but it wasn't assignable, check (parent) dependencies\n\n\n    [NOTE]: 'CONFIG_BLK_DEV_FD' last val (m) and .config val (n) do not match\n    [INFO]: CONFIG_BLK_DEV_FD : n\n    [INFO]: raw config text:\n\n        config BLK_DEV_FD\n        \ttristate \"Normal floppy disk support\"\n        \tdepends on ARCH_MAY_HAVE_PC_FDC && BLK_DEV\n        \thelp\n        \t  If you want to use the floppy disk drive(s) of your PC under Linux,\n        \t  say Y. Information about this driver, especially important for IBM\n        \t  Thinkpad users, is contained in\n        \t  <file:Documentation/admin-guide/blockdev/floppy.rst>.\n        \t  That file also contains the location of the Floppy driver FAQ as\n        \t  well as location of the fdutils package used to configure additional\n        \t  parameters of the driver at run time.\n\n        \t  To compile this driver as a module, choose M here: the\n        \t  module will be called floppy.\n\n        Config 'BLK_DEV_FD' has the following Direct dependencies (BLK_DEV_FD=n):\n                ARCH_MAY_HAVE_PC_FDC(=y) && BLK_DEV(=n)\n        Parent dependencies are:\n             ARCH_MAY_HAVE_PC_FDC [y] BLK_DEV [n]\n    [INFO]: config 'CONFIG_BLK_DEV_FD' was set, but it wasn't assignable, check (parent) dependencies\n\n\n    [NOTE]: 'CONFIG_IRQ_REMAP' last val (y) and .config val (n) do not match\n    [INFO]: CONFIG_IRQ_REMAP : n\n    [INFO]: raw config text:\n\n        config IRQ_REMAP\n        \tbool \"Support for Interrupt Remapping\"\n        \tselect DMAR_TABLE\n        \tdepends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && IOMMU_SUPPORT\n        \thelp\n        \t  Supports Interrupt remapping for IO-APIC and MSI devices.\n        \t  To use x2apic mode in the CPU's which support x2APIC enhancements or\n        \t  to support platforms with CPU's having > 8 bit APIC ID, say Y.\n\n        Config 'IRQ_REMAP' has the following Direct dependencies (IRQ_REMAP=n):\n                X86_64(=y) && X86_IO_APIC(=y) && PCI_MSI(=y) && ACPI(=y) && IOMMU_SUPPORT(=n)\n        Parent dependencies are:\n             X86_IO_APIC [y] ACPI [y] PCI_MSI [y] IOMMU_SUPPORT [n] X86_64 [y]\n    [INFO]: config 'CONFIG_IRQ_REMAP' was set, but it wasn't assignable, check (parent) dependencies\n\n\n\nWARNING: linux-yocto-5.14.21+gitAUTOINC+4f4ad2c808_9d5572038e-r0 do_kernel_configcheck: [kernel config]: This BSP contains fragments with warnings:\n\n\n[INFO]: the following symbols were not found in the active configuration:\n     - CONFIG_INPUT_POLLDEV","name":"","extension":"txt","url":"https://www.irccloud.com/pastebin/nAapZUm6","modified":1641909269,"id":"nAapZUm6","size":12858,"lines":285,"own_paste":false,"theme":"","date":1641909269}