{"body":"$ minicom -b 115200 -D /dev/ttyUSB1\n\n\nWelcome to minicom 2.7.1 \n \nOPTIONS: I18n \nCompiled on Dec 23 2019, 02:06:26. \nPort /dev/ttyUSB1, 15:27:12 \n \nPress CTRL-A Z for help on special keys \n \n[ 0.000000] Booting Linux on physical CPU 0x0 \n[ 0.000000] Linux version 5.15.56 (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 Fri Jul 22 13:23:23 UTC 2022\n[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d \n[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache \n[ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1 \n[ 0.000000] random: crng init done \n[ 0.000000] Memory policy: Data cache writeback \n[ 0.000000] Reserved memory: created CMA memory pool at 0x0bc00000, size 256 MiB \n[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool \n[ 0.000000] Zone ranges: \n[ 0.000000] Normal [mem 0x0000000000000000-0x000000001bffffff] \n[ 0.000000] Movable zone start for each node\n[ 0.000000] Early memory node ranges\n[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]\n[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]\n[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113680\n[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margit\n[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)\n[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)\n[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off\n[ 0.000000] Memory: 175532K/458752K available (10233K kernel code, 1363K rwdata, 3324K rodata, 452K init, 573K bss, 21076K reserved, 262144K cma-reserved)\n[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1\n[ 0.000000] ftrace: allocating 34206 entries in 101 pages\n[ 0.000000] ftrace: allocated 101 pages with 4 groups\n[ 0.000000] trace event string verifier disabled\n[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16\n[ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns\n[ 0.000103] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns\n[ 0.000216] bcm2835: system timer (irq = 27)\n[ 0.001133] Console: colour dummy device 80x30\n[ 0.001268] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)\n[ 0.060365] pid_max: default: 32768 minimum: 301\n[ 0.060616] LSM: Security Framework initializing\n[ 0.060960] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)\n[ 0.061022] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)\n[ 0.063305] cgroup: Disabling memory control group subsystem\n[ 0.063774] CPU: Testing write buffer coherency: ok\n[ 0.066042] Setting up static identity map for 0x8220 - 0x827c\n[ 0.067592] devtmpfs: initialized\n[ 0.080284] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5\n[ 0.081056] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.081128] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.123315] pinctrl core: initialized pinctrl subsystem\n[ 0.125598] NET: Registered PF_NETLINK/PF_ROUTE protocol family\n[ 0.130299] DMA: preallocated 1024 KiB pool for atomic coherent allocations\n[ 0.136561] audit: initializing netlink subsys (disabled)\n[ 0.138329] thermal_sys: Registered thermal governor 'step_wise'\n[ 0.138931] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.\n[ 0.138987] hw-breakpoint: maximum watchpoint size is 4 bytes.\n[ 0.139247] Serial: AMBA PL011 UART driver\n[ 0.140838] audit: type=2000 audit(0.130:1): state=initialized audit_enabled=0 res=1\n[ 0.153573] bcm2835-mbox 2000b880.mailbox: mailbox enabled\n[ 0.191082] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:04:36, variant start\n[ 0.201113] raspberrypi-firmware soc:firmware: Firmware hash is 102f1e848393c2112206fadffaaf86db04e98326\n[ 0.259464] Kprobes globally optimized\n[ 0.270695] bcm2835-dma 20007000.dma: DMA legacy API manager, dmachans=0x1\n[ 0.274033] SCSI subsystem initialized\n[ 0.274594] usbcore: registered new interface driver usbfs\n[ 0.274738] usbcore: registered new interface driver hub\n[ 0.274862] usbcore: registered new device driver usb\n[ 0.275419] usb_phy_generic phy: supply vcc not found, using dummy regulator\n[ 0.275793] usb_phy_generic phy: dummy supplies not allowed for exclusive requests\n[ 0.276407] pps_core: LinuxPPS API ver. 1 registered\n[ 0.276450] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti \n[ 0.276514] PTP clock support registered\n[ 0.277047] Advanced Linux Sound Architecture Driver Initialized.\n[ 0.279194] clocksource: Switched to clocksource timer\n[ 0.368316] VFS: Disk quotas dquot_6.6.0\n[ 0.368486] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)\n[ 0.368787] FS-Cache: Loaded\n[ 0.369317] CacheFiles: Loaded\n[ 0.370728] simple-framebuffer 1e513000.framebuffer: framebuffer at 0x1e513000, 0x6e7000 bytes\n[ 0.370792] simple-framebuffer 1e513000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296\n[ 2.068433] Console: switching to colour frame buffer device 228x61\n[ 2.097502] simple-framebuffer 1e513000.framebuffer: fb0: simplefb registered!\n[ 2.118209] NET: Registered PF_INET protocol family\n[ 2.118580] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)\n[ 2.120429] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)\n[ 2.120541] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)\n[ 2.120598] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)\n[ 2.120706] TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)\n[ 2.120809] TCP: Hash tables configured (established 4096 bind 4096)\n[ 2.121027] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)\n[ 2.121103] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)\n[ 2.121564] NET: Registered PF_UNIX/PF_LOCAL protocol family\n[ 2.122852] RPC: Registered named UNIX socket transport module.\n[ 2.122907] RPC: Registered udp transport module.\n[ 2.122931] RPC: Registered tcp transport module.\n[ 2.122955] RPC: Registered tcp NFSv4.1 backchannel transport module.\n[ 2.123682] armv6-pmu arm-pmu: hw perfevents: no irqs for PMU, sampling events not supported\n[ 2.123794] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available\n[ 2.168097] Initialise system trusted keyrings\n[ 2.168664] workingset: timestamp_bits=14 max_order=17 bucket_order=3\n[ 2.182080] zbud: loaded\n[ 2.185193] FS-Cache: Netfs 'nfs' registered for caching\n[ 2.186513] NFS: Registering the id_resolver key type\n[ 2.186628] Key type id_resolver registered\n[ 2.186660] Key type id_legacy registered\n[ 2.186926] nfs4filelayout_init: NFSv4 File Layout Driver Registering...\n[ 2.186972] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...\n[ 2.189033] Key type asymmetric registered\n[ 2.189091] Asymmetric key parser 'x509' registered\n[ 2.189380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)\n[ 2.189423] io scheduler mq-deadline registered\n[ 2.189450] io scheduler kyber registered\n[ 2.201227] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled\n[ 2.205138] bcm2835-rng 20104000.rng: hwrng registered\n[ 2.205929] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)\n[ 2.208131] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000\n[ 2.218563] fb0: switching to vc4 from simple\n[ 2.219470] Console: switching to colour dummy device 80x30\n[ 2.223314] vc4-drm soc:gpu: bound 20400000.hvs (ops vc4_hvs_ops)\n[ 2.245041] brd: module loaded\n[ 2.257346] loop: module loaded\n[ 2.258523] Loading iSCSI transport class v2.0-870.\n[ 2.261312] usbcore: registered new interface driver smsc95xx\n[ 2.261382] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)\n[ 2.989619] Core Release: 2.80a\n[ 2.989681] Setting default values for core params\n[ 2.989726] Finished setting default values for core params\n[ 3.190042] Using Buffer DMA mode\n[ 3.190083] Periodic Transfer Interrupt Enhancement - disabled\n[ 3.190110] Multiprocessor Interrupt Enhancement - disabled\n[ 3.190133] OTG VER PARAM: 0, OTG VER FLAG: 0\n[ 3.190244] Dedicated Tx FIFOs mode\n[ 3.191696] \n[ 3.191719] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = cbd04000 dma = 0x8bd04000 len=9024\n[ 3.191796] FIQ FSM acceleration enabled for :\n[ 3.191796] Non-periodic Split Transactions\n[ 3.191796] Periodic Split Transactions\n[ 3.191796] High-Speed Isochronous Endpoints\n[ 3.191796] Interrupt/Control Split Transaction hack enabled\n[ 3.191997] \n[ 3.192010] WARN::hcd_init_fiq:457: FIQ on core 0\n[ 3.192041] \n[ 3.192047] WARN::hcd_init_fiq:458: FIQ ASM at c0750444 length 36\n[ 3.192079] \n[ 3.192091] WARN::hcd_init_fiq:496: MPHI regs_base at dc810000\n[ 3.192139] dwc_otg 20980000.usb: DWC OTG Controller\n[ 3.192211] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1\n[ 3.192347] dwc_otg 20980000.usb: irq 56, io mem 0x00000000\n[ 3.192425] Init: Port Power? op_state=1\n[ 3.192451] Init: Power Port (0)\n[ 3.192963] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15\n[ 3.193014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1\n[ 3.193048] usb usb1: Product: DWC OTG Controller\n[ 3.193078] usb usb1: Manufacturer: Linux 5.15.56 dwc_otg_hcd\n[ 3.193108] usb usb1: SerialNumber: 20980000.usb\n[ 3.194391] hub 1-0:1.0: USB hub found\n[ 3.194545] hub 1-0:1.0: 1 port detected\n[ 3.196525] usbcore: registered new interface driver usb-storage\n[ 3.196990] mousedev: PS/2 mouse device common for all mice\n[ 3.201391] sdhci: Secure Digital Host Controller Interface driver\n[ 3.201442] sdhci: Copyright(c) Pierre Ossman\n[ 3.202099] sdhci-pltfm: SDHCI platform and OF driver helper\n[ 3.203816] ledtrig-cpu: registered to indicate activity on CPUs\n[ 3.204378] hid: raw HID events driver (C) Jiri Kosina\n[ 3.204672] usbcore: registered new interface driver usbhid\n[ 3.204709] usbhid: USB HID core driver\n[ 3.205324] ashmem: initialized\n[ 3.214893] Initializing XFRM netlink socket\n[ 3.214988] NET: Registered PF_PACKET protocol family\n[ 3.215234] Key type dns_resolver registered\n[ 3.215869] registered taskstats version 1\n[ 3.215935] Loading compiled-in X.509 certificates\n[ 3.231964] uart-pl011 20201000.serial: cts_event_workaround enabled\n[ 3.232206] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2\n[ 3.235068] bcm2835-aux-uart 20215040.serial: there is not valid maps for state default\n[ 3.236098] printk: console [ttyS0] disabled\n[ 3.236314] 20215040.serial: ttyS0 at MMIO 0x20215040 (irq = 53, base_baud = 50000000) is a 16550\n[ 3.325247] Indeed it is in host mode hprt0 = 00021501\n[ 3.601839] usb 1-1: new high-speed USB device number 2 using dwc_otg\n[ 3.607404] Indeed it is in host mode hprt0 = 00001101\n[ 3.944801] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.61\n[ 3.944844] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0\n[ 3.944868] usb 1-1: Product: USB2.0 Hub\n[ 3.951184] hub 1-1:1.0: USB hub found\n[ 3.956221] hub 1-1:1.0: 4 ports detected\n[ 4.361982] usb 1-1.4: new high-speed USB device number 3 using dwc_otg\n[ 4.444512] printk: console [ttyS0] enabled\n[ 4.454603] vc4-drm soc:gpu: bound 20400000.hvs (ops vc4_hvs_ops)\n[ 4.463408] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer\n[ 4.470702] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver\n[ 4.482578] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0\n[ 4.488727] mmc-bcm2835 20300000.mmcnr: DMA channel allocated\n[ 4.523729] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.61\n[ 4.532335] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0\n[ 4.539819] usb 1-1.4: Product: USB2.0 Hub\n[ 4.546604] hub 1-1.4:1.0: USB hub found\n[ 4.552441] sdhost: log_buf @ 46eadcc8 (8bd03000)\n[ 4.557421] hub 1-1.4:1.0: 4 ports detected\n[ 4.612663] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)\n[ 4.644571] vc4-drm soc:gpu: bound 20400000.hvs (ops vc4_hvs_ops)\n[ 4.653960] Registered IR keymap rc-cec\n[ 4.658647] rc rc0: vc4 as /devices/platform/soc/20902000.hdmi/rc/rc0\n[ 4.665864] input: vc4 as /devices/platform/soc/20902000.hdmi/rc/rc0/input0\n[ 4.686270] vc4-drm soc:gpu: bound 20902000.hdmi (ops vc4_hdmi_ops)\n[ 4.694717] vc4-drm soc:gpu: bound 20004000.txp (ops vc4_txp_ops)\n[ 4.705103] vc4-drm soc:gpu: bound 20206000.pixelvalve (ops vc4_crtc_ops)\n[ 4.713485] vc4-drm soc:gpu: bound 20207000.pixelvalve (ops vc4_crtc_ops)\n[ 4.722531] vc4-drm soc:gpu: bound 20807000.pixelvalve (ops vc4_crtc_ops)\n[ 4.729648] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 4.738196] vc4-drm soc:gpu: bound 20c00000.v3d (ops vc4_v3d_ops)\n[ 4.745573] mmc0: new high speed SDHC card at address 0007\n[ 4.756268] mmcblk0: mmc0:0007 SD08G 7.21 GiB \n[ 4.764103] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0\n[ 4.776027] mmcblk0: p1 p2\n[ 4.780602] mmcblk0: mmc0:0007 SD08G 7.21 GiB\n[ 4.838699] mmc1: new high speed SDIO card at address 0001\n[ 4.914093] Console: switching to colour frame buffer device 240x67\n[ 4.914229] usb 1-1.4.2: new low-speed USB device number 4 using dwc_otg\n[ 4.959606] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device\n[ 4.969935] of_cfs_init\n[ 4.972832] of_cfs_init: OK\n[ 4.978691] ALSA device list:\n[ 4.981806] #0: vc4-hdmi\n[ 5.001703] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.\n[ 5.011955] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.\n[ 5.020696] devtmpfs: mounted\n[ 5.032521] Freeing unused kernel image (initmem) memory: 452K\n[ 5.038503] Kernel memory protection not selected by kernel config.\n[ 5.044980] Run /sbin/init as init process\n[ 5.080172] usb 1-1.4.2: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.10\n[ 5.089003] usb 1-1.4.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0\n[ 5.096693] usb 1-1.4.2: Product: Dell KB216 Wired Keyboard\n[ 5.124184] input: Dell KB216 Wired Keyboard as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/0003:413C:2113.0001/input/input1\n[ 5.201007] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-20980000.usb-1.4.2/input0\n[ 5.229695] input: Dell KB216 Wired Keyboard Consumer Control as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.1/0003:413C:2113.0002/input/input2\nINIT: version 3.04 booting\n[ 5.310145] input: Dell KB216 Wired Keyboard System Control as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.1/0003:413C:2113.0002/input/input3\n[ 5.326194] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-20980000.usb-1.4.2/input1\n[ 5.439584] usb 1-1.4.3: new high-speed USB device number 5 using dwc_otg\n[ 5.590653] usb 1-1.4.3: New USB device found, idVendor=0846, idProduct=9030, bcdDevice= 1.08\n[ 5.599465] usb 1-1.4.3: New USB device strings: Mfr=16, Product=32, SerialNumber=48\n[ 5.607385] usb 1-1.4.3: Product: WNA1100\n[ 5.611552] usb 1-1.4.3: Manufacturer: NETGEAR WNA\n[ 5.616468] usb 1-1.4.3: SerialNumber: 12345\n[ 5.751957] usb 1-1.4.4: new full-speed USB device number 6 using dwc_otg\nwarning: FBIOPUT_VSCREENINFO failed, double buffering disabled\n[ 5.893168] usb 1-1.4.4: New USB device found, idVendor=222a, idProduct=001c, bcdDevice= 0.02\n[ 5.901994] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0\n[ 5.909686] usb 1-1.4.4: Product: ILITEK Multi-Touch\n[ 5.914776] usb 1-1.4.4: Manufacturer: ILITEK\n[ 5.980203] input: ILITEK ILITEK Multi-Touch Touchscreen as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/0003:222A:001C.0003/input/input4\n[ 6.015590] hid-generic 0003:222A:001C.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [ILITEK ILITEK Multi-Touch] on usb-20980000.usb-1.4.4/input0\nStarting udev\n[ 7.079317] udevd[127]: starting version 3.2.11\n[ 7.231081] udevd[128]: starting eudev-3.2.11\n[ 8.060398] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.\n[ 8.136651] mc: Linux media interface: v0.10\n[ 8.161390] bcm2835_vc_sm_cma_probe: Videocore shared memory driver\n[ 8.167916] [vc_sm_connected_init]: start\n[ 8.324853] [vc_sm_connected_init]: installed successfully\n[ 9.419907] videodev: Linux video capture interface: v2.00\n[ 9.888839] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.\n[ 9.931209] input: ILITEK ILITEK Multi-Touch as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/0003:222A:001C.0003/input/input6\n[ 9.953947] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.\n[ 10.009595] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.\n[ 10.070511] hid-multitouch 0003:222A:001C.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [ILITEK ILITEK Multi-Touch] on usb-20980000.usb-1.4.4/input0\n[ 10.230205] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.\n[ 10.301167] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.\n[ 10.409016] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13\n[ 10.453341] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.\n[ 10.525714] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14\n[ 10.600218] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15\n[ 10.630875] bcm2835-codec bcm2835-codec: Device registered as /dev/video10\n[ 10.638090] bcm2835-codec bcm2835-codec: Loaded V4L2 decode\n[ 10.694011] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16\n[ 10.763028] bcm2835-isp bcm2835-isp: Register output node 0 with media controller\n[ 10.775512] bcm2835-codec bcm2835-codec: Device registered as /dev/video11\n[ 10.849126] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller\n[ 10.864099] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller\n[ 10.872137] bcm2835-codec bcm2835-codec: Loaded V4L2 encode\n[ 10.950966] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller\n[ 10.960306] bcm2835-codec bcm2835-codec: Device registered as /dev/video12\n[ 10.967477] bcm2835-codec bcm2835-codec: Loaded V4L2 isp\n[ 11.106867] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20\n[ 11.162206] bcm2835-codec bcm2835-codec: Device registered as /dev/video18\n[ 11.193521] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21\n[ 11.229374] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx\n[ 11.290205] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22\n[ 11.322489] bcm2835-codec bcm2835-codec: Device registered as /dev/video31\n[ 11.384254] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23\n[ 11.392396] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image\n[ 11.500612] bcm2835-isp bcm2835-isp: Register output node 0 with media controller\n[ 11.508387] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller\n[ 11.629358] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller\n[ 11.637163] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller\n[ 11.750160] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 11.849615] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp\n[ 11.993790] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 14.049465] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1\n[ 14.060395] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.bin failed with error -2\n[ 14.171078] usbcore: registered new interface driver brcmfmac\n[ 14.365606] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1\n[ 14.389534] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1\n[ 14.417402] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897\n[ 16.871998] usb 1-1.4.3: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested\n[ 16.880176] usb 1-1.4.3: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw failed with error -2\n[ 16.889477] usb 1-1.4.3: ath9k_htc: Firmware htc_9271.fw requested\n[ 16.895984] usb 1-1.4.3: Direct firmware load for htc_9271.fw failed with error -2\n[ 16.907416] usbcore: registered new interface driver ath9k_htc\n[ 16.919137] usb 1-1.4.3: no suitable firmware found!\n[ 16.924390] usb 1-1.4.3: ath9k_htc: Failed to get firmware htc_9271.fw\n[ 16.936271] usb 1-1.4.3: ath9k_htc: USB layer deinitialized\n[ 17.846499] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.\nFri Mar 9 12:34:56 UTC 2018\nALSA: Restoring mixer settings...\nalsa-lib /usr/src/debug/alsa-lib/1.2.7.2-r0/src/ucm/main.c:1541:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2\nNo state is present for card vc4hdmi\nalsa-lib /usr/src/debug/alsa-lib/1.2.7.2-r0/src/ucm/main.c:1541:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2\nFound hardware: \"vc4-hdmi\" \"\" \"\" \"\" \"\"\nHardware is initialized using a generic method\nNo state is present for card vc4hdmi\nConfiguring packages on first boot....\n (This may take several minutes. Please do not power off the machine.)\nRunning postinst /etc/rpm-postinsts/100-sysvinit-inittab...\nupdate-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)\n Removing any system startup links for run-postinsts ...\n /etc/rcS.d/S99run-postinsts\nINIT: Entering runlevel: 5\nConfiguring network interfaces... ip: SIOCGIFFLAGS: No such device\nStarting system message bus: dbus.\nStarting Connection Manager\nStarting Xserver\nStarting Dropbear SSH server: \nGenerating 2048 bit rsa key, this may take a while...\n[ 23.951517] NET: Registered PF_INET6 protocol family\n[ 23.972285] Segment Routing with IPv6\n[ 23.979397] In-situ OAM (IOAM) with IPv6\n\nX.Org X Server 1.21.1.7\nX Protocol Version 11, Revision 0\nCurrent Operating System: Linux raspberrypi0-wifi 5.15.56 #1 Fri Jul 22 13:23:23 UTC 2022 armv6l\nKernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margint\n \nCurrent version of pixman: 0.40.0\n Before reporting problems, check http://wiki.x.org\n to make sure that you have the latest version.\nMarkers: (--) probed, (**) from config file, (==) default setting,\n (++) from command line, (!!) notice, (II) informational,\n (WW) warning, (EE) error, (NI) not implemented, (??) unknown.\n(==) Log file: \"/var/log/Xorg.0.log\", Time: Fri Mar 9 12:35:02 2018\n(==) Using config file: \"/etc/X11/xorg.conf\"\n(==) Using system config directory \"/usr/share/X11/xorg.conf.d\"\nD-BUS per-session daemon address is: unix:path=/tmp/dbus-3gcdRyDxlw,guid=ed3912834ea467c4ddf6b1ca5aa27f7b\nINFO: width=1920, height=1080\nmatchbox: Cant find a keycode for keysym 269025056\nmatchbox: ignoring key shortcut XF86Calendar=!$contacts\n\nmatchbox: Cant find a keycode for keysym 2809\nmatchbox: ignoring key shortcut telephone=!$dates\n\nmatchbox: Cant find a keycode for keysym 269025050\nmatchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop\n\n[ 35.050281] cam-dummy-reg: disabling\n[settings daemon] Forking. run with -n to prevent fork\ndbus-daemon[628]: Activating service name='org.a11y.atspi.Registry' requested by ':1.2' (uid=0 pid=644 comm=\"matchbox-panel --start-applets showdesktop,windows\")\nmatchbox-wm: X error warning (0x1000003): BadWindow (invalid Window parameter) (opcode: 12)\ndbus-daemon[628]: Successfully activated service 'org.a11y.atspi.Registry'\n","name":"","extension":"txt","url":"https://www.irccloud.com/pastebin/kerQzGon","modified":1679601594,"id":"kerQzGon","size":26636,"lines":372,"own_paste":false,"theme":"","date":1679601594}