{"body":"(H2U P=opsis R=opsis-flash-fix) xf@yogacore:~/dev/video/HDMI2USB-litex-firmware$ make gateware-load-opsis\nopsis-mode-switch --verbose --load-gateware build/opsis_video_lm32//gateware/top.bit\nWARNING:root:unbind-helper not found, will have to run as root!\nNumato Opsis in 'jtag' mode at /dev/bus/usb/002/034\n /sys/bus/usb/devices/2-3.2.1\n /sys/bus/usb/devices/2-3.2.1:1.0\nMy root dir: /home/xf/dev/video/HDMI2USB-litex-firmware/build/conda/lib/python3.5/site-packages/hdmi2usb/modeswitch\nBoard already in required mode (jtag)\nNumato Opsis in 'jtag' mode at /dev/bus/usb/002/034\n /sys/bus/usb/devices/2-3.2.1\n /sys/bus/usb/devices/2-3.2.1:1.0\nRunning ['openocd', '-f', 'board/numato_opsis.cfg', '-c', 'init; xc6s_print_dna xc6s.tap; pld load 0 /home/xf/dev/video/HDMI2\nUSB-litex-firmware/build/opsis_video_lm32/gateware/top.bit; reset halt; exit']   \nOpen On-Chip Debugger 0.10.0+dev-00166-g0e4fbfba0-dirty (2017-07-03-06:50)\nLicensed under GNU GPL v2\nFor bug reports, read\n        http://openocd.org/doc/doxygen/bugs.html\nWarn : Adapter driver 'usb_blaster' did not declare which transports it allows; assuming legacy JTAG-only\nInfo : only one transport option; autoselect 'jtag'\nWarn : incomplete ublast_vid_pid configuration\njtagspi_program\nInfo : usb blaster interface using libftdi\nInfo : This adapter doesn't support configurable speed\nInfo : TAP xc6s.tap does not have IDCODE\nInfo : JTAG tap: auto0.tap tap/device found: 0x81010101 (mfg: 0x080 (<invalid>), part: 0x1010, ver: 0x8)\nInfo : JTAG tap: auto1.tap tap/device found: 0x01404981 (mfg: 0x4c0 (<unknown>), part: 0x1404, ver: 0x0)\nInfo : TAP auto2.tap does not have IDCODE\nInfo : JTAG tap: auto3.tap tap/device found: 0xffffffd1 (mfg: 0x7e8 (<unknown>), part: 0xffff, ver: 0xf)\nError: xc6s.tap: IR capture error; saw 0x03 not 0x01\nWarn : Bypassing JTAG setup events due to errors\nDNA = 110000001100000011000000110000001100000010011000110011010 (0x18181818181319a)\n\nloaded file /home/xf/dev/video/HDMI2USB-litex-firmware/build/opsis_video_lm32/gateware/top.bit to pld device 0 in 31s 983992u\ns\nInfo : JTAG tap: xc6s.tap tap/device found: 0x02020203 (mfg: 0x101 (Camintonn Corporation), part: 0x2020, ver: 0x0)\nWarn : JTAG tap: xc6s.tap       UNEXPECTED: 0x02020203 (mfg: 0x101 (Camintonn Corporation), part: 0x2020, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 1 of 13: 0x04000093 (mfg: 0x049 (Xilinx), part: 0x4000, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 2 of 13: 0x04001093 (mfg: 0x049 (Xilinx), part: 0x4001, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 3 of 13: 0x04002093 (mfg: 0x049 (Xilinx), part: 0x4002, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 4 of 13: 0x04004093 (mfg: 0x049 (Xilinx), part: 0x4004, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 5 of 13: 0x04024093 (mfg: 0x049 (Xilinx), part: 0x4024, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 6 of 13: 0x04008093 (mfg: 0x049 (Xilinx), part: 0x4008, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 7 of 13: 0x04028093 (mfg: 0x049 (Xilinx), part: 0x4028, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 8 of 13: 0x0400e093 (mfg: 0x049 (Xilinx), part: 0x400e, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 9 of 13: 0x0402e093 (mfg: 0x049 (Xilinx), part: 0x402e, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 10 of 1: 0x04011093 (mfg: 0x049 (Xilinx), part: 0x4011, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 11 of 1: 0x04031093 (mfg: 0x049 (Xilinx), part: 0x4031, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 12 of 1: 0x0401d093 (mfg: 0x049 (Xilinx), part: 0x401d, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 13 of 1: 0x0403d093 (mfg: 0x049 (Xilinx), part: 0x403d, ver: 0x0)\nInfo : TAP auto0.tap does not have IDCODE\nInfo : JTAG tap: auto1.tap tap/device found: 0x01404981 (mfg: 0x4c0 (<unknown>), part: 0x1404, ver: 0x0)\nInfo : TAP auto2.tap does not have IDCODE\nInfo : JTAG tap: auto3.tap tap/device found: 0xffffffd1 (mfg: 0x7e8 (<unknown>), part: 0xffff, ver: 0xf)\nError: Trying to use configured scan chain anyway...\nError: xc6s.tap: IR capture error; saw 0x03 not 0x01\nWarn : Bypassing JTAG setup events due to errors\nTraceback (most recent call last):\n  File \"/home/xf/dev/video/HDMI2USB-litex-firmware/build/conda/bin/opsis-mode-switch\", line 11, in <module>\n    load_entry_point('hdmi2usb.modeswitch==0.0.0.post184', 'console_scripts', 'opsis-mode-switch')()\n  File \"/home/xf/dev/video/HDMI2USB-litex-firmware/build/conda/lib/python3.5/site-packages/hdmi2usb/modeswitch/cli.py\", line 305, in main\n    board, args.load_gateware, verbose=args.verbose)\n  File \"/home/xf/dev/video/HDMI2USB-litex-firmware/build/conda/lib/python3.5/site-packages/hdmi2usb/modeswitch/boards.py\", line 282, in load_gateware\n    return _openocd_script(board, script, verbose=verbose)\n  File \"/home/xf/dev/video/HDMI2USB-litex-firmware/build/conda/lib/python3.5/site-packages/hdmi2usb/modeswitch/boards.py\", line 230, in _openocd_script\n    \"\\n\".join(errors_found), p.returncode, cmdline, output)\nhdmi2usb.modeswitch.boards.OpenOCDError: OpenOCD run failure: Found following errors in output;\n- DNA = 110000001100000011000000110000001100000010011000110011010 (0x18181818181319a)\n- Error: Trying to use configured scan chain anyway...\n- Info : TAP xc6s.tap does not have IDCODE\n- Warn : Bypassing JTAG setup events due to errors.\n\nOpenOCD command line resulted in 0\n-----\n['openocd', '-f', 'board/numato_opsis.cfg', '-c', 'init; xc6s_print_dna xc6s.tap; pld load 0 /home/xf/dev/video/HDMI2USB-litex-firmware/build/opsis_video_lm32/gateware/top.bit; reset halt; exit']\n-----                              \n\nOpenOCD output:\n-----\nOpen On-Chip Debugger 0.10.0+dev-00166-g0e4fbfba0-dirty (2017-07-03-06:50)\nLicensed under GNU GPL v2\nFor bug reports, read\n        http://openocd.org/doc/doxygen/bugs.html\nWarn : Adapter driver 'usb_blaster' did not declare which transports it allows; assuming legacy JTAG-only\nInfo : only one transport option; autoselect 'jtag'\nWarn : incomplete ublast_vid_pid configuration\njtagspi_program\nInfo : usb blaster interface using libftdi\nInfo : This adapter doesn't support configurable speed\nInfo : TAP xc6s.tap does not have IDCODE\nInfo : JTAG tap: auto0.tap tap/device found: 0x81010101 (mfg: 0x080 (<invalid>), part: 0x1010, ver: 0x8)\nInfo : JTAG tap: auto1.tap tap/device found: 0x01404981 (mfg: 0x4c0 (<unknown>), part: 0x1404, ver: 0x0)\nInfo : TAP auto2.tap does not have IDCODE\nInfo : JTAG tap: auto3.tap tap/device found: 0xffffffd1 (mfg: 0x7e8 (<unknown>), part: 0xffff, ver: 0xf)\nError: xc6s.tap: IR capture error; saw 0x03 not 0x01\nWarn : Bypassing JTAG setup events due to errors\nDNA = 110000001100000011000000110000001100000010011000110011010 (0x18181818181319a)\n\nloaded file /home/xf/dev/video/HDMI2USB-litex-firmware/build/opsis_video_lm32/gateware/top.bit to pld device 0 in 31s 983992us\nInfo : JTAG tap: xc6s.tap tap/device found: 0x02020203 (mfg: 0x101 (Camintonn Corporation), part: 0x2020, ver: 0x0)\nWarn : JTAG tap: xc6s.tap       UNEXPECTED: 0x02020203 (mfg: 0x101 (Camintonn Corporation), part: 0x2020, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 1 of 13: 0x04000093 (mfg: 0x049 (Xilinx), part: 0x4000, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 2 of 13: 0x04001093 (mfg: 0x049 (Xilinx), part: 0x4001, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 3 of 13: 0x04002093 (mfg: 0x049 (Xilinx), part: 0x4002, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 4 of 13: 0x04004093 (mfg: 0x049 (Xilinx), part: 0x4004, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 5 of 13: 0x04024093 (mfg: 0x049 (Xilinx), part: 0x4024, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 6 of 13: 0x04008093 (mfg: 0x049 (Xilinx), part: 0x4008, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 7 of 13: 0x04028093 (mfg: 0x049 (Xilinx), part: 0x4028, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 8 of 13: 0x0400e093 (mfg: 0x049 (Xilinx), part: 0x400e, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 9 of 13: 0x0402e093 (mfg: 0x049 (Xilinx), part: 0x402e, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 10 of 1: 0x04011093 (mfg: 0x049 (Xilinx), part: 0x4011, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 11 of 1: 0x04031093 (mfg: 0x049 (Xilinx), part: 0x4031, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 12 of 1: 0x0401d093 (mfg: 0x049 (Xilinx), part: 0x401d, ver: 0x0)\nError: JTAG tap: xc6s.tap expected 13 of 1: 0x0403d093 (mfg: 0x049 (Xilinx), part: 0x403d, ver: 0x0)\nInfo : TAP auto0.tap does not have IDCODE\nInfo : JTAG tap: auto1.tap tap/device found: 0x01404981 (mfg: 0x4c0 (<unknown>), part: 0x1404, ver: 0x0)\nInfo : TAP auto2.tap does not have IDCODE\nInfo : JTAG tap: auto3.tap tap/device found: 0xffffffd1 (mfg: 0x7e8 (<unknown>), part: 0xffff, ver: 0xf)\nError: Trying to use configured scan chain anyway...\nError: xc6s.tap: IR capture error; saw 0x03 not 0x01\nWarn : Bypassing JTAG setup events due to errors\n\n-----\n\ntargets/opsis/Makefile.mk:6: recipe for target 'gateware-load-opsis' failed\nmake: *** [gateware-load-opsis] Error 1\n","name":"","extension":"txt","url":"https://www.irccloud.com/pastebin/Qr98SHJR","modified":1501146183,"id":"Qr98SHJR","size":8853,"lines":125,"own_paste":false,"theme":"","date":1501146183}