{"body":"pi@pdp11a:/opt/pidp11/systems/211bsd $ cat boot.ini \n; model a PDP-11/70 with maximum memory, fpu, no CIS\nset cpu 11/70 4096K fpp\n; disable all extra devices by default, will enable later\ndetach all\nreset all\n; use 7b ascii terminal\nset tto 7b\n; set the boot disk as an MSCP UDA50\nset rq enabled\nset rq0 rauser=1000\nattach rq0 2.11BSD_rq.dsk\n; set one DZ11 8 line async mux\n; accessible via telnet to 127.0.0.1:4000...4007\nset dz enabled\nset dz lines=8\nset dz 7b\n;attach -am dz 4000\nattach dz 4000\n;\nsho dz\n; set one DELUA/DEUNA unibus enet controller\n; ==> must setup ethX per your system config\nset xq dis\nset xu enabled\nset xu type=delua\nattach xu wlan0\n;attach xu tap:tap-simh0\n\nsh xu\nsh eth\n;set xq mac=b8:27:eb:47:39:6f\n; enable RX211 controller\n;set ry enabled\n;set ry0 double\n;set ry1 double\n;attach ry0 rx0.dsk\n;attach ry1 rx1.dsk\n; enable 11/44 TU-58 port\n;set dli enabled\n;set dlo enabled\n;set dli lines=1\n;set dlo 8b\n;set dlo dataset\n;attach dli 4010\n; enable one tape device on a TMSCP controller\nset tq enabled\n; show our config\n;show devices\n;show cpu iospace\n;connect to panel\nset realcons host=localhost\nset realcons panel=11/70\n; We're running on a desktop PC with connection to localhost: max speed!\nset realcons interval=1\nset realcons connected\n;set realcons debug\n;show realcons\n; Configure all csr/vector\nset cpu autoconfig\n; Change DZ vector\nset dz vector=310\n; boot it\n;set throttle 40M\nboot rq0","name":"","extension":"txt","url":"https://www.irccloud.com/pastebin/IK1lS3tn","modified":1718132372,"id":"IK1lS3tn","size":1420,"lines":65,"own_paste":false,"theme":"","date":1718132372}